1. Axial or radial clearance gap is too small to be adjusted again repair.
2. There is dirt inside the pump, in order to remove foreign bodies disintegrated.
3. The assembly is incorrect,
gear oil pump two pin hole machining datum not assemble planes, such as the pin into the first, and then tighten the screw, the pump will not turn.
4. Coupling concentricity bad pump and motor, should ensure concentricity within 0.01mm.
5. No demagnetization
honghai pump parts, all parts before assembly require demagnetization.
6. Needle roller sets the quality standard, or broken, repaired or replaced.
7. The pump outlet is blocked, remove foreign bodies.
Gear Pump is a lightweight real-time big data streaming engine. It is inspired by recent advances in the Akka framework and a desire to improve on existing streaming frameworks.
The name
hot oil pump is a reference to the engineering term “gear pump,” which is a super simple pump that consists of only two gears, but is very powerful at streaming water.
4. Coupling concentricity bad pump and motor, should ensure concentricity within 0.01mm.
5. No demagnetization honghai pump parts, all parts before assembly require demagnetization.
6. Needle roller sets the quality standard, or broken, repaired or replaced.
7. The pump outlet is blocked, remove foreign bodies.
Gear Pump is a lightweight real-time big data streaming engine. It is inspired by recent advances in the Akka framework and a desire to improve on existing streaming frameworks.
The name hot oil pump is a reference to the engineering term “gear pump,” which is a super simple pump that consists of only two gears, but is very powerful at streaming water.
没有评论:
发表评论