LCW Type Lobe Pump

low rotating rate high efficiency small volume, big flow low consumed power, strong self-priming ability, easy to operate and no oil drawing. Gear pumps. LCW high viscosity roots asphalt pump has low revolution, high efficiency, small size, large flow, consume less power, self-priming ability strong, need not lead oil, easy to use and can positive &negative work etc. Drive mode: belt drive and reducer connection drive two forms. LCW high viscosity roots asphalt pump can be widely used to transport oil and oil products and transport all kinds of oils and liquid. Such as crude oil, paint, oil, glass glue, fat acid, toothpaste and weak alkali (soap processing) liquid, etc.; Food processing can transport all kinds of liquid, such as: bean paste, yeast, syrup, etc. Handling all kinds of tank car and tanker and speed, high efficiency and easy to use. The oil, chemicals, asphalt, food, urban construction, transportation and so on the profession ideal conveying equipment. Crude industry Lubrication industry Paint industry Glass glue industry Oil ocid industry Toothpas teindustry Capacity:10m3/h~100 m3/h Temperature: 140 °C~200°C Welcome to Honghai Pump Co. ,Ltd.

About Honghai ZYB Series Booster Fuel Pump

Advanced structure small volume big capacity low noise long service life Honghai ZYB series booster fuel gear pump is our company developed new type product. At present domestic fuel oil alternative products, product quality is uneven, common fuel pump or pump imported already can not adapt to the situation,In view of the situation, our company according to international advanced level and the actual situation of domestic fuel, designed the this new product. After many users use, the effect is very significant, successfully replaced the imported products and the ordinary pump products (1) ZYB series the ignition fuel pump, booster fuel gear pump suitable for transferring diesel, heavy oil, residual oil, fuel oil and medium can be used for fuel. Especially suitable for road and bridge engineering mixing station and power plant burners of the fuel pump. The product has the characteristics of high hardness, wear resistance, adjustable pressure. It is ideal product for replacing the import pump. According to different burners’s features in different country, this product have two types: 4.0Mpa and 2.5Mpa.Seal have graphite sealing and mechanical seal for customer’s choice. mono screw pump. (2)ZYB series booster fuel pump is not suitable for transferring highly volatile or low flash point of the liquid, such as ammonia, benzene, etc. (3)ZYB series booster fuel pump if transfer liquid such as gasoline, must indicate in order. (4) Winter construction, in order to prevent the transmission of oil solidification causes the damage of the fuel pump, our factory also produces BZYB series insulation booster pump, heating medium can use thermal oil, steam or hot oil pump. Transfer gasoline, diesel, heavy oil，residual oil, fuel oil Capacity:3-800m3/h

About Honghai 3GCL vertical three screw pump

1, medium for linear continuous conveying, without stirring, without pulsation. 2, little vibration, low noise. 3, high pressure, high efficiency. 4, simple structure, easy disassembling. 5, small volume, light weight. 6, wear light, long life. Food pump . 1. Steady operating, low noise, long life and high efficiency, 2. Very competitive price 3. CCS available 4. 1 year of warranty 5. Vertical installment ship-pump 6. Widely aplicable for fuel transfer, hydraulic engineering, maritime boat, petrochemical and other industry. 7. Use for transfer of various medium with lubricant performance, the max. Environment temperature is 50°C. Fuel supply industry Hydraulic engineering industry Marine engineering industry Petrochemical industry 1. temperature :below 80 °C 2. viscosity : 3~760cst 3. pressure: 0.6~2.5Mpa 4. capacity: 0.6~123m3/h As for Honghai screw pump series, there is also eccentric screw pump, vertical screw pump and screw oil pump. Honghai Pump Co., Ltd always focuses on the clients’ requirements and guarantees the complete sales service system and continuous development and innovation. Honghai is progressing and improving with ”Contribute to Society" as its glory, with "Benefit the World" as its lofty idea. Hope you would like to join us in our persistent innovation and create a bright future together.

Honghai CYZ series self-priming centrifugal oil pump

1. Simple structure 2. Convenient operation and maintenance 3. Stable operation, large flow 4. High efficiency, easy to adjust Honghai CYZ series explosion-proof centrifugal pump belongs to self-priming centrifugal oil pump. The feature of this series centrifugal pump is simple constructed, easy to operation, convenient repairing, high displacement, high efficiency, wide application scope etc. It’s widely used especially for vessels to transport gasoline, kerosene, diesel, aviation kerosene and other petroleum products. Asphalt pump. The medium temperature is - 20 ℃ ~ + 80 ℃. It is a good centrifugal oil pump for transporting easy combustion and explosive media. And it is suitable for the land oil transportation, oil depot, fuel oil storage device, can also be used for transporting seawater, freshwater etc. Capacity:: 3 to 550 m3/h; Temperature: -20-+80℃ Theory: Gear lobe pump. Fuel: Electric Application: gasoline, kerosene, diesel, aviation kerosene and other petroleum products Honghai CYZ series centrifugal pump is used to transport gasoline, kerosene, diesel, aviation kerosene and other petroleum products, especially for marine cargo. Honghai CYZ series centrifugal pump can also be used in oil depot, and tank farm. As well it's suitable for transporting sea water, fresh water, and so on. .

Some Little Tips about the Oil Pump

How to ensure G mono pumps’ pressure The max output pressure of G mono pump is according to bushhing series Level1: the max working pressure is 0.6mpa Level2: the max working pressure is 1.2mpa Level4: the max working pressure is 2.4mpa Asphalt pump. The solutions of solving gear pump’s electric current too large and not working suddenly The fault phenomenon: electric current is too large The reasons of fault: a, output pressure is too high. b, the viscosity of medium is too large. c, assembly of shaft seal is wrong d, shaft or bearing is damaged. e, fault of electric motor Methods: a, check lower equipment and pipeline. b, check medium’s viscosity. c, round the gear by hand when the pump is not working, check whether the gear round smoothly. d, check electric motor. The reasons of three screw pumps doesn’t suck up oil 1.Screw and pump bush are damaged, repair or replacement spare parts. 2.Suction pipe line jams or air leakage, check the pipe line. 3.Motor is reversal or speed is lower, please change motor. 4.Valve is out of work, please adjust spring or repair valve and valve seat. The detailed introduction of high temperature thermal insulation lubrication pump This type of pump is used to asphalt mixing equipment that transfer or spray asphalt oil, this is ideal equipment to asphalt factory, it’s also appropriate to other high viscosity medium. Every models has two kinds of structure forms: one is motor connect pump with coupling (six stage motor), the other is motor connect pump with belt pulley (four stage motor) This type of pump applies to transfer the medium not including solid particle and has solidifiability under the normal temperature and temperature below 350 centigrade, like heavy oil, bitumen, glue resin, detergent and so on. It especially used for the condition that the medium required to keep heat in outdoor installation at cold region. If the pump’s material is stainless steel, it can transfer high viscosity and corrosive mediums.

The Reason Why Gear Pump Does Not Run Smooth

1. Axial or radial clearance gap is too small to be adjusted again repair. 2. There is dirt inside the pump, in order to remove foreign bodies disintegrated. 3. The assembly is incorrect, gear oil pump two pin hole machining datum not assemble planes, such as the pin into the first, and then tighten the screw, the pump will not turn. 4. Coupling concentricity bad pump and motor, should ensure concentricity within 0.01mm. 5. No demagnetization honghai pump parts, all parts before assembly require demagnetization. 6. Needle roller sets the quality standard, or broken, repaired or replaced. 7. The pump outlet is blocked, remove foreign bodies. Gear Pump is a lightweight real-time big data streaming engine. It is inspired by recent advances in the Akka framework and a desire to improve on existing streaming frameworks. The name hot oil pump is a reference to the engineering term “gear pump,” which is a super simple pump that consists of only two gears, but is very powerful at streaming water.

The way to choose material of chemical pumps

The corrosion is one of the most dangerous harm to chemical equipment all the time, a little carelessness will damage the equipment or cause accidents and disasters. According to statistics, 60% of damages are caused by corrosion, so it’s first to choose the material of pumps. It’s a misconception that a lot of people think stainless steel is almighty. Now let’s talk about the point of choosing materials for chemical medium. Oil pumps. 1, Sulfuric acid(H2SO4)is one of the most strong corrosive medium, and it’s widely used as industrial raw materials. Different temperature and concentrations have different corrosive, if the concentration is higher than 80%,temperature is lower than 80℃ cast iron is best, but it’s not appropriate to high speed flow Sulfuric acid and not suitable to make pump valve. General stainless steel like SS304 (0Cr18Ni9) and SS316 (0Cr18Ni12Mo2Ti) are limited use to Sulfuric acid. So we often use high silicon cast iron (different processing) and high alloy stainless steel. Fluorine plastic has good ability of corrosion resistance and fluorine pump is economical. The pumps’ type is IHF fluorine plastic pump, PF (FS) centrifugal pump, CQB-F fluorine plastic magnetic pump. 2, Hydrochloric acid Most of metallic materials are not resistant to hydrochloric acid corrosion (include a lot of stainless steel materials).Molybdenum containing high silicon iron only use for the hydrochloric acid that temperature below 50centigrade concentration below 30%.On contrary, a lot of non-metallic materials have good ability of corrosion resistance, so lining rubber pumps and plastic pumps (polypropylene, fluorine plastic) are the best choose. The pumps’ type are: IHF fluorine plastic pump, PF (FS) centrifugal pump, CQ fluorine plastic magnetic pump. 3, Nitrate acid General metals are damaged in nitrate acid quickly, tainless steel is widely used, it has good ability of corrosion resistance in normal temperature and all kinds of concentration. The ability of corrosion resistance of stainless steel containing molybdenum like SS316,SS316L are not better than SS304,SS321.We often use titanium and titanium alloy materials for high temperature nitrate acid. Our pumps’ type are: DFL(W)H chemical pump, DFL(W)PH shielding chemical pump, DFCZ process pump, DFLZP self-priming chemical pump, IH chemical pump, CQB magnetic pump, the material is SS304. Honghai pump.