Honghai 2W W twin screw pump

2W W twin screw pump

1. Smooth conveying liquid  2. No pulse 3. No stirring 4. Small vibration 5. Low noise.
2. 1, conveying liquid stationary, no pulse, no stirring, little vibration, low noise.

2, have very strong self-priming performance, heterogeneous mixing to lose, gas rate is not higher than 80%, sand concent not higher than 500 g/m3.
3, the outer bearing structure, adopt independent lubrication, can transport all kinds of lubricity medium.
4, the synchronous gear drive, two rotor between contacts, even for a short time idle also just as well.
5, pump body with heating jacket, can transport all kinds of clean or containing solid granule of low viscosity and high viscosity medium (general particle diameter less than 0.12-0.2 mm)
6, the correct selection of materials, and even can transport a lot of corrosive medium.
7, double suction type structure, there is no rotor axial force.
8, and end use of mechanical seal or bellows mechanical seal, with long life, less leakage, wide application characteristics.
Application of this series Twin screw pump
Food industry
Oil fields industry
Ship building industry
Petroleum chemical industry
Power plant industry
Honghai is looking forward to cooperation with you!
temperature: -20~120℃ viscosity: 1~3000mm2/s Pressure； 4.0MPa capacity:1～1000m3/h