Honghai Thermal oil pump

Honghai Thermal oil pump
1. Simple structure
2. Good performance
3. Reliable operation
4. High-temperature
5. Small volume, save cost

Brief Introduction
This series of thermal oil pump is produced on the basis of air-cooled hot oil pump, which is able to resist higher temperature. It adapts high technology and works high efficiency. Under high temperature, it’s able to work steadily without any leakage. As well, water cooling system is more safe and reliable.

This water-cooled thermal oil pump is scientific-constructed, mainly for conveying liquids with high temperature, below 350℃ is acceptable. It’s suggested to transport weak corrosive fluid without any solid particles. Honghai Thermal oil pump is an ideal circulating pump.

As for the corrosion resistance ability and temperature, the material of the relevant spare parts determines.

Capcacity: 1-500m3/h
Temperature: -20℃-350℃
Head: 10-125m
Theory: Centrifugal Pump

 

Feature
1. Honghai water-cooled thermal oil pump is the second generation thermal oil pump based on the overseas water-cooled thermal oil pump. The basic structure is single grade cantilever type.

2. It’s double end ball bearing supporting. The former end adapts lubricating oil, and the latter end uses grease. In the middle, there is an oil guiding pipe for the purpose of observation of sealing situation and recycle the thermal conductive oil.

                                                                                                     
3. It adapts self-thermal dissipation structure, which changes the traditional construction and enables simple structure, small volume, cost saving, and reliable working.

4. PTFE, the third generation of Polytetrafluoroethylene is used for lips sealing, which greatly improve the sealing property, about 25 times reliable than the rubber sealing.

The materials contacting the liquids are mainly 1.HT200；II.ZG230-450；III.1Cr18Ni9Ti，OCr18Ni12-Mo2Ti.

 

Application
Now you can see that Honghai thermal oil pumps are widely used in many areas like petrol, chemistry, rubber, plastics, pharmacy, textile, printing and dyeing, food and road construction.

To be specific, please check below:

1. Petroleum Industry
2. Chemical Industry
3. Pharmacy and Health
4. Environmental and Water treatment
5. Electroplating industry
6. Environmental protection
7. Food service industry
8. Printing and dyeing area
9. Textile industry, etc

 

 

 

 

Technical Data

Model	Capacity m3/h	Lift m	Speed r/min	Power kw		Efficiency η%	Motor-Y
				Shaft  power	Power  Distribution
15-15-100	3	10	2800	0.45	0.75	20	801
15-15-100A	2	10	2800	0.36	0.55	18	AO2-7122
15-15-100B	1	10	2800	0.2	0.37	15	AO2-7112
20-20-100	1	10	2800	0.09	0.37	26	AO2-7112
20-20-125	1.5	22	2800	0.22	0.75	30	801
40-25-160	10	28	2900	1.72	2.2	45	90L
25-25-160	3	27	2900	0.53	1.5	30	90S
32-32-160	6	28	2900	0.85	1.5	50	90S
50-32-160	12.5	30	2900	1.90	3.0	57	100L

 

Honghai Pump can be used in different areas, so there are bitumen pump, sanitary pump, food pump, hot oil pumps, fuel pump, fuel gear pump and diesel pump. Feel free to contact us.